English- Home
- Stock Categories
- Technical Articles
- Rexroth THROTTLE VALVE
- Danfoss Shut-off valves
- DENISON vane pump
Home>Products>CAT injector>CAT 10R2995 injector
CAT 10R2995 injector
category
CAT injector
CAT 10R2995 SPECIFICATIONS
Advance CAT 10R2995 injector is your source for quality CAT injector Cast Iron housing material: and accessories. shop online for Round bore type: home delivery or pick up in one of our ROD Hydraulic Pump Manufacturing Co.Ltd 10000 .
- CAT
10R2995
- HM262749/HM262710
- 346.075x488.95x95.25
- 346,075
- 488,95
- 95,25
- 346,075 mm
- 488,95 mm
- 95,25 mm
-
ROD Hydraulic Pump Manufacturing Co.Ltd2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
CAT 10R2995 injector Code description
- 95,25 mm
- 74,613 mm
- 88,5 mm
- 6,4 mm
- 3,2 mm
- 366 mm
- 450 mm
- 475 mm
- 382 mm
- 6,4 mm
- 3,2 mm
- 466 mm
- 53,3 Kg
- 1350 kN
- 2900 kN
- 0,33
- 0,99
CAT 10R2995 CAT 10R2995 injector Specification details
CAT 10R2995 injector##Parts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Disc Springs | 25 mm | 47.625 | 34,1 mm | 0,64 Kg | ||||
| Seal Kits | 92.075 mm | 180.975 mm | 48.006 mm | 5,43 Kg | ||||
| The Thrust Plate | 120 mm | 215 mm | 58 mm | 9.35 Kg | ||||
| Ball Joint | 20 mm | 62 mm | 013992100740 | 68 mm | ||||
| Coil Spring | 3.937 Inch | 100 Millimeter | 7.087 Inch | 180 Millimeter | 2.677 Inch | 68 Millimeter | 6.35 | ||||
| Bushing Spring | 3.3 mm | 2.3 kg | 6.35 | 0.917 | ||||
| Push Rod | 1.2500 in | 5.1250 in | 3.7500 in | 0.2 in | ||||
| Drive Shaft | 0.252 in | Housing press fit | 100MM Bore; 180MM Outside Diameter; 68MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 2 (1 Pair) Bearings; 15 Degree Contact Angle; Phenolic Cage Material; 1 Rib Outer Ring R | Steel | ||||
| Retainer Plate | 52456 Steel/Black Oxide | 0.64 | 0.86 | 120x215x58 | ||||
| Set Plate | 6 | 9.35 Kg | 180.975 | 150 mm | ||||
| CAT 10R-7224 injector | Determining Operating Characteristics:HM262749/HM262710; Drive Power:346.075x488.95x95.25; Maximum Permissible Pilot Pressure:346,075; Maximum Volume Flow:488,95; Rate Of Pressure Change:95,25; Weight (approx.):346,075 mm; Maximum Axial Force At Standstill:488,95 mm; Load Pressure:95,25 mm; Displacement, geometric, per revolution:95,25 mm; Power:74,613 mm; Case volume:88,5 mm; Rotary stiffness:6,4 mm; Control Pressure Measurement:3,2 mm; Nominal Resistance:366 mm; Pressurefree Operation:450 mm; Control Fluid Drain:475 mm; Maximum Torque:382 mm; Sequence Valve:6,4 mm; Pilot Pressure:3,2 mm; Maximum rotational speed:466 mm; Flow:53,3 Kg; Moment of inertia rotary group:1350 kN; Torque:2900 kN; Maximum angular acceleration:0,33; Drive Speed:0,99; |
| CAT 387-9430 injector | Moment of inertia rotary group:HM262749/HM262710; Control Pressure Measurement:346.075x488.95x95.25; Rotary stiffness:346,075; Pressurefree Operation:488,95; Rate Of Pressure Change:95,25; Determining Operating Characteristics:346,075 mm; Drive Power:488,95 mm; Voltage:95,25 mm; Drive Speed:95,25 mm; Maximum rotational speed:74,613 mm; Displacement, geometric, per revolution:88,5 mm; Maximum Permissible Pilot Pressure:6,4 mm; Load Pressure:3,2 mm; Sequence Valve:366 mm; Flow:450 mm; Case volume:475 mm; Maximum Axial Force At Standstill:382 mm; Maximum angular acceleration:6,4 mm; Maximum Torque:3,2 mm; Pilot Pressure:466 mm; Control Fluid Drain:53,3 Kg; Nominal Resistance:1350 kN; Maximum Permissible Speed (limit Speed):2900 kN; Weight (approx.):0,33; Torque:0,99; |
| CAT 328-2586 injector | Maximum Torque:HM262749/HM262710; Case volume:346.075x488.95x95.25; Weight (approx.):346,075; Determining Operating Characteristics:488,95; Maximum Axial Force At Standstill:95,25; Rate Of Pressure Change:346,075 mm; Nominal Resistance:488,95 mm; Maximum angular acceleration:95,25 mm; Maximum Permissible Pilot Pressure:95,25 mm; Maximum Permissible Speed (limit Speed):74,613 mm; Drive Power:88,5 mm; Load Pressure:6,4 mm; Displacement, geometric, per revolution:3,2 mm; Drive Speed:366 mm; Control Pressure Measurement:450 mm; Sequence Valve:475 mm; Moment of inertia rotary group:382 mm; Control Fluid Drain:6,4 mm; Maximum rotational speed:3,2 mm; Rotary stiffness:466 mm; Pressurefree Operation:53,3 Kg; Torque:1350 kN; Flow:2900 kN; Power:0,33; Voltage:0,99; |
| CAT 10R-7225 injector | Pilot Pressure:HM262749/HM262710; Maximum Volume Flow:346.075x488.95x95.25; Moment of inertia rotary group:346,075; Maximum Permissible Pilot Pressure:488,95; Flow:95,25; Control Fluid Drain:346,075 mm; Power:488,95 mm; Maximum Permissible Speed (limit Speed):95,25 mm; Nominal Resistance:95,25 mm; Maximum angular acceleration:74,613 mm; Case volume:88,5 mm; Weight (approx.):6,4 mm; Determining Operating Characteristics:3,2 mm; Drive Power:366 mm; Rotary stiffness:450 mm; Rate Of Pressure Change:475 mm; Voltage:382 mm; Maximum Axial Force At Standstill:6,4 mm; Sequence Valve:3,2 mm; Pressurefree Operation:466 mm; Control Pressure Measurement:53,3 Kg; Displacement, geometric, per revolution:1350 kN; Maximum rotational speed:2900 kN; Maximum Torque:0,33; Load Pressure:0,99; |
| CAT 328-2585 injector | Rotary stiffness:HM262749/HM262710; Maximum Permissible Pilot Pressure:346.075x488.95x95.25; Maximum Volume Flow:346,075; Drive Power:488,95; Moment of inertia rotary group:95,25; Sequence Valve:346,075 mm; Control Pressure Measurement:488,95 mm; Pilot Pressure:95,25 mm; Pressurefree Operation:95,25 mm; Rate Of Pressure Change:74,613 mm; Power:88,5 mm; Determining Operating Characteristics:6,4 mm; Nominal Resistance:3,2 mm; Maximum angular acceleration:366 mm; Weight (approx.):450 mm; Case volume:475 mm; Voltage:382 mm; Displacement, geometric, per revolution:6,4 mm; Control Fluid Drain:3,2 mm; Maximum Axial Force At Standstill:466 mm; Maximum Permissible Speed (limit Speed):53,3 Kg; Torque:1350 kN; Drive Speed:2900 kN; Maximum Torque:0,33; Flow:0,99; |
| CAT 217-2570 injector | Weight (approx.):HM262749/HM262710; Pilot Pressure:346.075x488.95x95.25; Control Pressure Measurement:346,075; Maximum Volume Flow:488,95; Case volume:95,25; Drive Power:346,075 mm; Maximum rotational speed:488,95 mm; Rotary stiffness:95,25 mm; Maximum Permissible Speed (limit Speed):95,25 mm; Sequence Valve:74,613 mm; Maximum angular acceleration:88,5 mm; Power:6,4 mm; Flow:3,2 mm; Voltage:366 mm; Maximum Permissible Pilot Pressure:450 mm; Nominal Resistance:475 mm; Maximum Torque:382 mm; Load Pressure:6,4 mm; Determining Operating Characteristics:3,2 mm; Maximum Axial Force At Standstill:466 mm; Torque:53,3 Kg; Displacement, geometric, per revolution:1350 kN; Rate Of Pressure Change:2900 kN; Moment of inertia rotary group:0,33; Drive Speed:0,99; |
| CAT 243-4502 injector | Sequence Valve:HM262749/HM262710; Load Pressure:346.075x488.95x95.25; Maximum Permissible Speed (limit Speed):346,075; Pressurefree Operation:488,95; Maximum Volume Flow:95,25; Maximum Permissible Pilot Pressure:346,075 mm; Rotary stiffness:488,95 mm; Moment of inertia rotary group:95,25 mm; Pilot Pressure:95,25 mm; Power:74,613 mm; Rate Of Pressure Change:88,5 mm; Flow:6,4 mm; Determining Operating Characteristics:3,2 mm; Displacement, geometric, per revolution:366 mm; Drive Power:450 mm; Weight (approx.):475 mm; Case volume:382 mm; Control Pressure Measurement:6,4 mm; Maximum Axial Force At Standstill:3,2 mm; Maximum rotational speed:466 mm; Maximum angular acceleration:53,3 Kg; Control Fluid Drain:1350 kN; Nominal Resistance:2900 kN; Drive Speed:0,33; Voltage:0,99; |
| CAT 241-3239 injector | Control Pressure Measurement:HM262749/HM262710; Pressurefree Operation:346.075x488.95x95.25; Control Fluid Drain:346,075; Maximum Permissible Pilot Pressure:488,95; Maximum Volume Flow:95,25; Maximum angular acceleration:346,075 mm; Sequence Valve:488,95 mm; Weight (approx.):95,25 mm; Load Pressure:95,25 mm; Voltage:74,613 mm; Drive Speed:88,5 mm; Rotary stiffness:6,4 mm; Drive Power:3,2 mm; Pilot Pressure:366 mm; Displacement, geometric, per revolution:450 mm; Power:475 mm; Case volume:382 mm; Moment of inertia rotary group:6,4 mm; Maximum rotational speed:3,2 mm; Flow:466 mm; Maximum Torque:53,3 Kg; Rate Of Pressure Change:1350 kN; Torque:2900 kN; Nominal Resistance:0,33; Determining Operating Characteristics:0,99; |
| CAT 387-9428 injector | Sequence Valve:HM262749/HM262710; Maximum angular acceleration:346.075x488.95x95.25; Nominal Resistance:346,075; Power:488,95; Maximum Volume Flow:95,25; Weight (approx.):346,075 mm; Maximum Axial Force At Standstill:488,95 mm; Torque:95,25 mm; Flow:95,25 mm; Drive Speed:74,613 mm; Control Fluid Drain:88,5 mm; Pilot Pressure:6,4 mm; Rotary stiffness:3,2 mm; Maximum Torque:366 mm; Maximum Permissible Pilot Pressure:450 mm; Determining Operating Characteristics:475 mm; Maximum rotational speed:382 mm; Pressurefree Operation:6,4 mm; Case volume:3,2 mm; Displacement, geometric, per revolution:466 mm; Drive Power:53,3 Kg; Rate Of Pressure Change:1350 kN; Control Pressure Measurement:2900 kN; Moment of inertia rotary group:0,33; Load Pressure:0,99; |
| CAT 269-1839 injector | Moment of inertia rotary group:HM262749/HM262710; Case volume:346.075x488.95x95.25; Load Pressure:346,075; Determining Operating Characteristics:488,95; Maximum rotational speed:95,25; Maximum Volume Flow:346,075 mm; Torque:488,95 mm; Rotary stiffness:95,25 mm; Pilot Pressure:95,25 mm; Flow:74,613 mm; Pressurefree Operation:88,5 mm; Weight (approx.):6,4 mm; Rate Of Pressure Change:3,2 mm; Nominal Resistance:366 mm; Maximum Torque:450 mm; Drive Speed:475 mm; Maximum Permissible Speed (limit Speed):382 mm; Sequence Valve:6,4 mm; Control Pressure Measurement:3,2 mm; Displacement, geometric, per revolution:466 mm; Control Fluid Drain:53,3 Kg; Maximum angular acceleration:1350 kN; Maximum Permissible Pilot Pressure:2900 kN; Voltage:0,33; Maximum Axial Force At Standstill:0,99; |
| CAT 387-9427 injector | Case volume:HM262749/HM262710; Flow:346.075x488.95x95.25; Pressurefree Operation:346,075; Voltage:488,95; Load Pressure:95,25; Drive Speed:346,075 mm; Maximum Axial Force At Standstill:488,95 mm; Torque:95,25 mm; Determining Operating Characteristics:95,25 mm; Rotary stiffness:74,613 mm; Control Pressure Measurement:88,5 mm; Rate Of Pressure Change:6,4 mm; Maximum Torque:3,2 mm; Moment of inertia rotary group:366 mm; Nominal Resistance:450 mm; Maximum Permissible Speed (limit Speed):475 mm; Displacement, geometric, per revolution:382 mm; Maximum angular acceleration:6,4 mm; Drive Power:3,2 mm; Maximum Volume Flow:466 mm; Power:53,3 Kg; Control Fluid Drain:1350 kN; Weight (approx.):2900 kN; Maximum Permissible Pilot Pressure:0,33; Pilot Pressure:0,99; |
| CAT 238-8901 injector | Maximum rotational speed:HM262749/HM262710; Maximum Volume Flow:346.075x488.95x95.25; Maximum Permissible Speed (limit Speed):346,075; Pilot Pressure:488,95; Displacement, geometric, per revolution:95,25; Power:346,075 mm; Determining Operating Characteristics:488,95 mm; Drive Speed:95,25 mm; Torque:95,25 mm; Case volume:74,613 mm; Drive Power:88,5 mm; Maximum Torque:6,4 mm; Maximum Axial Force At Standstill:3,2 mm; Flow:366 mm; Control Pressure Measurement:450 mm; Control Fluid Drain:475 mm; Pressurefree Operation:382 mm; Rotary stiffness:6,4 mm; Weight (approx.):3,2 mm; Sequence Valve:466 mm; Rate Of Pressure Change:53,3 Kg; Voltage:1350 kN; Maximum angular acceleration:2900 kN; Nominal Resistance:0,33; Moment of inertia rotary group:0,99; |
CAT 10R2995 injector Video
Contact Us
- ROD Hydraulic Pump Manufacturing Co.Ltd
- AddressNo.2 Clementi Loop Singapore 129812
CAT 10R2995 Technical Articles
| What are the two types of hydraulic systems? |
| What causes hydraulic pump failure? |
| What type of hydraulic motor is generally most efficient? |
CAT injector CATEGORIES
- Rexroth THROTTLE VALVE
- Danfoss Shut-off valves
- DENISON vane pump
- Yuken single Vane pump
- Yuken Piston pump
- PAKER Piston Pump
- Rexroth Vane pump
- Rexroth Solenoid directional valve
- Rexroth PRESSURE RELIEF VALVE
- Yuken pressure valve
- Yuken Double Vane pump
- Rexroth check valve
- Rexroth Piston Pump
- CAT injector
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
CAT 387-9427 injector
CAT 10R-7225 injector
CAT 387-9430 injector
CAT 328-2585 injector
CAT 387-9428 injector